IRC912
1280×1024 Indium Antimonide (InSb) MWIR Infrared Camera
The IRC912 high definition 12 micron infrared camera provides the superior performance of a cooled MWIR sensor at up to 119 frames per second full frame and supports sub windowing for even higher frame rates.
Based on the most advanced infrared focal plane technology available today the IRC912 offers NEdT greater than 99.5% operability, and extremely high uniformity the IRC912 is the perfect choice for the most demanding MWIR imaging applications.
IRC912 Specifications
| Detector | |
| Detector type | Indium Antimonide (InSb) |
| Spectral response | < 1.0µm to 5.3µm |
| Resolution (pixels) | 1280 x 1024 |
| Pixel pitch | 12µm |
| Imaging Electronics | |
| Frame rate @ max window size | 119 Hz |
| Integration time | < 150 ns to full frame |
| Dynamic range | 14-bits with 13-bit option to increase frame rate at small window sizes |
| Windowing | User defined in 4×1 increments; min width=320, min height=32 |
| Integration type | Snapshot, automatic selection of integrate while read or integrate then read |
| Ultra low latency sync | Sync I/O, integration out |
| Image data | Simultaneous Camera Link & Gig-E |
| Communications | Serial over Camera Link & Gig-E |
| Software control | Cross platform GenICam compliant |
| Performance | |
| NEdT | < 30mK |
| Well capacity (electrons) | 2M |
| Operability | 99.6% |
| Optics | |
| Camera f/# | f/2.3, f/3.0 &Â f/4.0 standard; custom cold shields available on request |
| Cold filter | 3.0µm – 5.0µm or no cold filter standard, optional CO2, SWIR or custom filters on request |
| Lens mount | Bayonet |
| Optional filter wheel | Motorized four position warm filter wheel; 25.4mm diameter x 1.0mm thick filters |
| General | |
| Power @ 24 VDC | 28W |
| System weight | < 7 pounds |
| Closed cycle cooler | Rotary |
| Size | 5.1″ x 5.8″ x 8″ |
| Operating temperature range | -40C to +55C (-40°F to +131°F) |
| Storage temperature range | -55C to +80C (-67°F to +176°F) |
| Environmental rating | IP-51 |
| Mounting holes | 2x 1/4-20 & 4x #10-24 |
Specifications are subject to change without notice.
