IRC910

1024×1024 Indium Antimonide (InSb) MWIR Infrared Camera

IRC 900The IRC910 a high definition cooled camera at 76 frames per second full frame rate, offering the most superior performance of a cooled MWIR sensor in a large format imaging camera. Super framing allows the camera to switch among different integration times on a frame by frame basis to image rapidly changing scenes over a wide dynamic range.

Full rate image data capture is available via Camera Link and simultaneous Gigabit Ethernet is also available. The IRC910 is perfect for Quality Assurance, Long Range Surveillance and Scientific Imaging applications.

IRC910 Specifications
Detector
Detector type Indium Antimonide (InSb)
Spectral response < 1.0µm to 5.3µm
Resolution (pixels) 1024 x 1024
Pixel pitch 25µm
Imaging Electronics
Frame rate @ max window size 76 Hz
Integration time < 150 ns to full frame
Dynamic range 14-bits with 13-bit option to increase frame rate at small window sizes
Windowing User defined in 4×1 increments; min width=320, min height=32
Integration type Snapshot, automatic selection of integrate while read or integrate then read
Ultra low latency sync Sync I/O, integration out
Image data Simultaneous Camera Link & Gig-E
Communications Serial over Camera Link & Gig-E
Software control Cross platform GenICam compliant
Performance
NEdT 18mK
Well capacity (electrons) 10M
Operability 99.6%
Optics
Camera f/# f/2.3, f/3.0 & f/4.0 standard; custom cold shields available on request
Cold filter 3.0µm – 5.0µm or no cold filter standard, optional CO2, SWIR or custom filters on request
Lens mount Bolt hole pattern
Optional filter wheel Motorized four position warm filter wheel; 25.4mm diameter x 1.0mm thick filters
General
Power @ 24 VDC 35W
System weight < 10 pounds
Closed cycle cooler Linear
Size 6″ x 6″ x 9″
Operating temperature range -40C to +55C (-40°F to +131°F)
Storage temperature range -55C to +80C (-67°F to +176°F)
Environmental rating IP-51
Mounting holes 2x 1/4-20 & 4x #10-24
Specifications are subject to change without notice.