Complete 900 Series Specifications

Model # IRC906 IRC906HS IRC910 IRC912
Detector
Detector type Indium Antimonide (InSb)
Spectral response < 1.0µm to 5.3µm
Resolution (pixels) 640 x 512 640 x 512 1024 x 1024 1280 x 1024
Pixel pitch 20µm 12µm 25µm 12µm
Imaging Electronics
Frame rate @ max window size 119 Hz 475 Hz 76 Hz 119 Hz
Integration time < 150 ns to full frame
Dynamic range 14-bits with 13-bit option to increase frame rate at small window sizes
Windowing User defined in 4×1 increments; min width=320, min height=32
Integration type Snapshot, automatic selection of integrate while read or integrate then read
Ultra low latency sync Sync I/O, integration out
Image data Simultaneous Camera Link & Gig-E
Communications Serial over Camera Link & Gig-E
Software control Cross platform GenICam compliant
Performance
NEdT 18mK < 30mK 18mK < 30mK
Well capacity (electrons) 7M 2M 10M 2M
Operability 99.8% 99.6% 99.6% 99.6%
Optics
Camera f/# f/2.3, f/3.0 & f/4.0 standard; custom cold shields available on request
Cold filter 3.0µm – 5.0µm or no cold filter standard, optional CO2, SWIR or custom filters on request
Lens mount Bayonet Bayonet Bolt hole pattern Bayonet
Optional filter wheel Motorized four position warm filter wheel; 25.4mm diameter x 1.0mm thick filters
General
Power @ 24 VDC 20W 25W 35W 28W
System weight < 7 pounds < 7 pounds < 10 pounds < 7 pounds
Closed cycle cooler Rotary Rotary Linear Rotary
Size 5.1″ x 5.8″ x 8″ 5.1″ x 5.8″ x 8″ 6″ x 6″ x 9″ 5.1″ x 5.8″ x 8″
Operating temperature range -40C to +55C (-40°F to +131°F)
Storage temperature range -55C to +80C (-67°F to +176°F)
Environmental rating IP-51
Mounting holes 2x 1/4-20 & 4x #10-24