IRC906HS
640×512 Indium Antimonide (InSb) MWIR Infrared Camera
The IRC906HS provides the superior performance of a cooled MWIR sensor in a large format imaging camera. Based on the most advanced infrared high speed focal plane technology available today, the IRC906HS offers unmatched sensitivity, ultra-low noise, no blooming and no crosstalk.
This camera operates at up to 478 Hz full frame rate and supports sub-windowing and triggering for even faster throughput and synchronization with external events. A Software Developers Kit is also available for users who wish to create their own applications.
IRC906HS Specifications
Detector | |
Detector type | Indium Antimonide (InSb) |
Spectral response | < 1.0µm to 5.3µm |
Resolution (pixels) | 640 x 512 |
Pixel pitch | 12µm |
Imaging Electronics | |
Frame rate @ max window size | 475 Hz |
Integration time | < 150 ns to full frame |
Dynamic range | 14-bits with 13-bit option to increase frame rate at small window sizes |
Windowing | User defined in 4×1 increments; min width=320, min height=32 |
Integration type | Snapshot, automatic selection of integrate while read or integrate then read |
Ultra low latency sync | Sync I/O, integration out |
Image data | Simultaneous Camera Link & Gig-E |
Communications | Serial over Camera Link & Gig-E |
Software control | Cross platform GenICam compliant |
Performance | |
NEdT | <30mK |
Well capacity (electrons) | 2M |
Operability | 99.6% |
Optics | |
Camera f/# | f/2.3, f/3.0 & f/4.0 standard; custom cold shields available on request |
Cold filter | 3.0µm – 5.0µm or no cold filter standard, optional CO2, SWIR or custom filters on request |
Lens mount | Bayonet |
Optional filter wheel | Motorized four position warm filter wheel; 25.4mm diameter x 1.0mm thick filters |
General | |
Power @ 24 VDC | 25W |
System weight | <Â 7 pounds |
Closed cycle cooler | Rotary |
Size | 5.1″ x 5.8″ x 8″ |
Operating temperature range | -40C to +55C (-40°F to +131°F) |
Storage temperature range | -55C to +80C (-67°F to +176°F) |
Environmental rating | IP-51 |
Mounting holes | 2x 1/4-20 & 4x #10-24 |