| Mechanical
|
| Model |
Enclosed |
OEM |
Module (no lens)
Width x Height x Depth 1 |
2.1 in. x 2.1 in. x 2.55 in.
53 mm x 53 mm x 65 mm |
1.64 in. x 1.5 in. x 1.60 in.
42 mm x 38 mm x 41 mm |
| Weight (no lens) |
< 270 g |
< 90 g |
| Lens Mount |
C-mount adapter in M42x1 mount |
C-mount bracket |
| Included Lens |
f/1.4, 25mm, 18º FOV width, C-mount |
none |
| Camera Link Connector |
3M SDR26 Connector |
none |
| I/O Connector |
3M SDR14 Connector |
none |
| Interface Connector |
Not applicable |
Samtec QSH-030-01-L-D-A |
| Pixel Pitch |
25 µm |
| Focal Plane Array Format |
320 x 256 pixels |
| Active Area |
| 8 mm x 6.4 mm x 10.2 mm
diagonal |
|
| 1 Depth
Includes Cable Mount Hardware for Enclosed Version |
|
| Environmental & Power |
| Operating Case Temperature |
-10°C to 40°C |
|
| Storage Temperature |
-10°C to 60°C |
|
| Humidity |
Non-condensing |
|
Power Requirements:
AC Adapter Supplied
DC Voltage
Typical Power
|
100-240 VAC, 47-63 Hz
+9-16 V
2.2 W at 20°C ambient,< 4.5 W @ 40°C |
|
| Electrical |
| |
Variable integration time modes |
Variable gain, fixed integration time |
| Exposure Times |
120 µs to 14.93 ms in 8 steps |
16.57 ms |
| Gain (typical) |
180 e/count |
180 to 16000 e/count in 8 steps |
| Full Well (typical) |
700k e |
700k to 45M e in 8 steps |
| Mean Detectivity, D* 1 |
> 5 x 1012 cm √Hz/W |
| Noise (RMS)1 |
< 300 e |
| Noise Equivalent Irradiance1 |
< 3.5 x 109 photons/cm2•s |
| True Dynamic Range |
> 2500:1 |
| Spectral Response: InGaAs |
0.9 µm to 1.7 µm |
| Quantum Efficiency: InGaAs |
> 65 % from 1 µm to 1.6 µm |
| Spectral Response: Visible InGaAsTM |
0.4 µm to 1.7 µm |
| Quantum Efficiency: Visible InGaAs |
> 5% QE at 0.4 µm
> 45% QE at 0.8 µm
> 70% QE from 1 to 1.6 µm |
| Optical Fill Factor |
> 100% |
| Operability 2 |
> 99% |
| Image Correction |
2-point (offset and gain) pixel by pixel, user
selectable |
| Digital Output Format |
12 bit Camera Link®
(SDR connector on enclosed version, Samtec QSH series connector on OEM) |
| Analog Output Format |
Buffered EIA170 compatible video,
60 fields/s, independent 320 x 256 frame readout per field |
| Digital Output Frame Rate |
60 fps |
| Scan Mode |
Continuous or 3 externally triggered modes |
1λ = 1.55 µm, exposure time = 16.57 ms, no lens, digital gain
x1 with AGC and corrections off, measured in operational setting of
the camera with the smallest FPA gain.
2 The fraction of pixels with responsivity deviation less
than +/-35% from the mean |
